CONFAST 3/16" x 1-3/4" Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to Masonry, Block or Brick (100 per Box)
11 sold in last 24 hours
- BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
- SLOTTED HEX HEAD-Can be driven with a nut driver
- SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
- DIAMOND POINT-Easier to drive the screw to save time
Tags |
Estimated shipping
Select a product to estimate shipping.Applications
The anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Dry environment.
Head Style
The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.
Hole Diameter/Bit Diameter
The anchor requires a 5/32" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A 1/4" nut driver is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 3/16".
Length Anchor
The length of the anchor is 1-3/4"
Thread Length
The length of the threads on the anchor is 1-3/4" in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1/4" to 3/4". This will ensure that the minimum embedment of 1" will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/16" diameter anchor requires the hole in the fixture to be 1/4".
Spacing between Anchors
Each anchor must be spaced a minimum distance of 3" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/4" from an unsupported edge of the concrete.
| Main Specification | |
|---|---|
| Fabricante | CONFAST |
| Número de unidades | Contagem de 100 |
| Dimensões do item L x W x H | 3.5 x 3.5 x 4 inches |
| Terminar Exterior | Blue Ruspert |
| Tipo de Metal | Aço de liga |
| Estilo de Cabeçalho | Hex Washer |
| Cobertura do Tópico | Totalmente roscado |
| Marca | Confast |
| Tipo de Cabeçalho | Hex |
| UPC | 820274000250 |
| Tipo de Fixador | self-tapping-taps |
| Diâmetro do Item | 0.03 inches |
| Número de Peças | 100 |
| Tamanho do Fixador | 3/16 inch x 1-3/4 inch |
| Tamanho do Tópico | 1-3/4 inches |
| Material | Carbon Steel - Blue Coated |
| Cor | Azul |
| Tipo de Tópico | Un |
| Sistema de transmissão | External Hex |
| Peso do Item | 16 onças |
| Product information | |
| Definir o Nome | CONFAST 3/16" x 1-3/4" Hex Head Concrete Screw (100/Box) |
| Technical Details | |
| Número da parte | CSH316134 |
| Tipo de Material | Carbon Steel - Blue Coated |
| Número de itens | 100 |
| Estilo do Tópico | Mão Direita |
| Classe de Tópico | Self-Tapping |
| Diâmetro Groove compatível | 0.16 Inches |
| Set Screw Thread Type | Unified National |
| Style | |
| Tipos de Acabamento | Blue Coated |
| Measurements | |
| Dimensões do Item | 3.5 x 3.5 x 4 inches |
| Others | |
| Tipo de produto | Concrete Screws |
| Nome do Tamanho | 3/16" x 1-3/4" |
| Estilo Cabeça de Parafuso | Hex Washer |
| Estilo Ponto de Parafuso | diamond point-easier |