CONFAST 1/4" x 2-1/2" Hammer Drive Nail in Anchor (100 per Box)
14 sold in last 24 hours
- INSTALLS INTO A VARIETY OF BASE MATERIALS-Can be used in a variety of applications making job easier and faster
- ANCHOR DIAMETER EQUALS HOLE DIAMETER-Makes it easy to determine hole size
- ALL SIZES PACKAGED 100 PIECES PER BOX-Quantity makes it easier to purchase and use
- PERMANENT FASTENING-Once installed, fastener cannot be removed, very secure
Tags |
Estimated shipping
Select a product to estimate shipping.Applications
The anchor is made from ZAMAC. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Dry environment.
Hole Diameter/Bit Diameter
The anchor requires a 1/4" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Diameter of Anchor
The diameter of the anchor is 1/4".
Length Anchor
The length of the anchor is 2-1/2"
Minimum Embedment
The minimum anchor embedment into the concrete is 3/4". Therefore, the anchor must be installed so that a minimum of 3/4" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 2-1/2" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 1-1/4" from an unsupported edge of the concrete.
| Main Specification | |
|---|---|
| Fabricante | CONFAST |
| Número de unidades | Contagem de 100 |
| Dimensões do item L x W x H | 0.19 x 0.88 x 0.88 inches |
| Diâmetro exterior | 0.25 Inches |
| Marca | Confast |
| UPC | 820274000632 |
| Número de itens | 100 |
| Tipo de Fixador | Hammer-In |
| Diâmetro do Item | 0,25 polegadas |
| Número de Peças | 100 |
| Tamanho do Tópico | 1/4-RM |
| Material | Zamac |
| Cor | Prata |
| Tamanho | 1/4" x 2- 1/2" |
| Product information | |
| Definir o Nome | 100-Piece Set |
| Technical Details | |
| Número da parte | HD14212 |
| Modelo | HD14212 |
| Tipo de Material | Zamac |
| Diâmetro Groove compatível | 0.25 Inches |
| Força máxima de shear | 450 |
| Style | |
| Tipos de Acabamento | Zinco |
| Measurements | |
| Dimensões do Item | 0.19 x 0.88 x 0.88 inches |
| Others | |
| Tipo de produto | Drive Anchors |
| Forma do Item | Block |
| Nome do Tamanho | 1/4" x 2- 1/2" |
| Estilo Cabeça de Parafuso | Mushroom |